Overview

Application: This product line is intended for use in the production of high quality exterior graphics for unsealed asphalt, concrete, unsealed brick and other building siding, where the message is to be applied for short-term advertising promotions, conventions, parking lots, and high foot-traffic areas.

Print Methods: Solvent or Eco-Sol digital printers, solvent/UV-curable silk screen printers, some electrostatic and thermal transfer printers, and some conventional offset printers.

Face Film: 2.0 ± 0.2 mils gloss white, non-PVC, proprietary, flexible, fracturable acrylic for temporary outdoor promotional graphics applications.

Liner: 6.7 ± 0.2 mils 90-Lb. Polyethylene-two-sides/silicone-one-side, Stay-Flat Liner.

Adhesive: 1.5 mils clear, rubber-base pressure activated removable

Properties

Total Product Thickness 10.2 ± 0.4 mils

Minimum Application Temperature +50° F.

Service Temperature Range 50° F To +110° F.

Expected Outdoor Life 3 months for vehicle traffic; 6 months for foot traffic

Gloss >50

Whiteness = 90

Water Resistance Good in non-standing water

Shelf Life One year when stored under conditions of 70°F and 50% relative humidity

Non-Slip Standards Exceeds ASTM C-1028, ASTM D-2047; UL-410; and ANSI-B101.1

Application Apply to dry, clean surface above +50° F. Use of application/transfer tape is strongly recommended. Felt-edge squeegee and/or bundled soft cloth recommended for pushing film into rough surfaces.